Mr. Belinda Johnson On Phone To Brother Sewing Machine Contact Service
I have a Brother sewing machine V X1100 and the needle hits the bobbin. How do I fixtures MAR5.
Ms. Kam Wygant On Phone To Brother Sewing Machine Contact Service
Whomever designed the lever to lift the pressure foot must have been on drugs. Its on the side and in the way for a person to reach through there and take hold of their fabric. My knuckle is all red and have a red spot between the index finger and middle finger. Put the damn lever at the back where it belongs on the Brother, CE1100PRW Project Runway, Limited Edition. Hopefully its limited all right. What a stupid thing to do to a sewing machine. I've been sewing for 55 years and this is ridiculous.
Ms. Andee Kajcienski On Phone To Brother Sewing Machine Contact Service
On thursday, 14 September 2017 I will take my brother innovis 1250D sewing machine in for the FOURTH time for the SAME problem. (I just picked it up today-the 13th) I am disgusted beyond words at this situation The buttonholes continue to be incomplete, and the tension is loopy on the bottom--and even coming over to the top side of the stitching In four trips you would assume it would be taken care of. It is not--WHY. It was purchased from Rocky Mountain Sewing and Vacuum, 8601 W. Cross Drive Littleton, CO-80123 on 09/02/15--and has been in the shop for MULTIPLE problems--Why is not it repaired correctly, after multiple trips for repair?.
Ms. Sini On Phone To Brother Sewing Machine Contact Service
Needle always Breaking while stiching. The machine is not working speedly. When Stiching time, the needle is Breaking 'please mention your service Centre in Kerala.
Mr. Cindy Rao On Phone To Brother Sewing Machine Contact Service
985-640-7923
Need help. The auto needle threader broke on my LB-6800 Project Runway Embroidery/Sewing Machine. I purchased the replacement part, but cannot determine how to remove the original part. I cannot find this information anywhere on the internet or in the manual. Please help. My mobile is above. Thank you. Cindy Rao .
Ms. Judy Taylor On Phone To Brother Sewing Machine Contact Service
Attempted to call about my PQ1500SL sewing machine. It constantly loosens up thread on the bottom. I fixed it before my tightening the bobbin tension, but now I cannot seem to get it fixed. What else could be the problem. Hope to hear from you soon. Need to sew some baby quilts as gifts for a couple people I know. Thanks. Judy Taylor .
Mr. Alida Davis On Phone To Brother Sewing Machine Contact Service
My sewing machine bobbin case keep slipping. A brother runway model CE1100PRW Very annoying, what causes this. I sew from my home for my business and this is very irritating and what can be done. I really stinks when I have to stop sewing to figure out what is wrong. I have asked for help before with no response?.